mezo aziz
زيزوومى مميز
- إنضم
- 26 أغسطس 2010
- المشاركات
- 387
- مستوى التفاعل
- 39
- النقاط
- 480
غير متصل
برنامج anti arp للحماية الجهاز من فصل النت والتجسس على مكالمات الشات+ الكراك+ الصور
ملحوظة :- البرنامج يقوم بأخفاء الأي بي من على الشبكة وبذلك لا يقوم احد بالتجسس على مكالمات الشات
يجب عليك
تسجيل الدخول
او
تسجيل لمشاهدة الرابط المخفي
يجب عليك
تسجيل الدخول
او
تسجيل لمشاهدة الرابط المخفي
الحمد لله وحده نحمده ونشكره ونستعين به ونستغفره ونعوذ بالله من شرور أنفسنا ومن سيئات أعمالنا
من يهده الله فلا مضل له ومن يضلل فلا هادي له
أشهد ان لا إله الا الله وحده لا شريك له
وأشهد أنا محمدا عبده ورسوله
اقدم لك اليوم برنامج AntiARP وهو برنامج شديد الحماية من فصل النت
وهو برنامج صيني قوي جدا يا جماعة بكل المقاييس كنت متابع الموقع بتاعهم من فترة بس كان باللغة الصيني ومن فترة كدة اتفاجئت انهم وضعو اللغة الانجليزية زي اللغة الصيني للموقع فاقدرت اجيب شرحة وأحمل البرنامج والنسخة الاخيرة
كمان ولسة نازلة بتاريخ 15 اكتوبر يعني من 11 يوم
ومن مميزاتة يقوم باضافة ميزتين في خصائص تعريف الشبكة عندك :
1 - بيعمل جدار ناري لمنع تأثير الأرب علي الجهاز عندك .
2 - بيفعل خاصية تأمين لديك وهيا NDIS .
3 - بيظهر أيقونة Security بجوار الساعة وفيها خاصية جميلة انها
تظهر وتختفي لو حدث وتم قطع النت عنك بالنت كت او سويتش سنيفر ,
وطبعا مش هايقدر يفصل النت عنك أبدا باذن الله .
ملحوظة:
أستخدم البرنامج فقط عند أنقطاع النت عنك , حتي لا يزيد الضغط علي الجهاز وشكرا
البرنامج ليس مجاني ويعمل لمده 15 يوم لكن انا اليوم جايب ليكم كراك للبرنامج ويقوم الكراك عند انتهاء مدة التجربة
15 يوم او قبل ذالك بدون حذف Anti Arp تقوم
بتفعيل الكراك عن طريق هذا البرنامج AntiTrial
شرح البرنامج بالصور
يجب عليك
تسجيل الدخول
او
تسجيل لمشاهدة الرابط المخفي
يجب عليك
تسجيل الدخول
او
تسجيل لمشاهدة الرابط المخفي
يجب عليك
تسجيل الدخول
او
تسجيل لمشاهدة الرابط المخفي
يجب عليك
تسجيل الدخول
او
تسجيل لمشاهدة الرابط المخفي
يجب عليك
تسجيل الدخول
او
تسجيل لمشاهدة الرابط المخفي
يجب عليك
تسجيل الدخول
او
تسجيل لمشاهدة الرابط المخفي
يجب عليك
تسجيل الدخول
او
تسجيل لمشاهدة الرابط المخفي
يجب عليك
تسجيل الدخول
او
تسجيل لمشاهدة الرابط المخفي
يجب عليك
تسجيل الدخول
او
تسجيل لمشاهدة الرابط المخفي
يجب عليك
تسجيل الدخول
او
تسجيل لمشاهدة الرابط المخفي
يجب عليك
تسجيل الدخول
او
تسجيل لمشاهدة الرابط المخفي
يجب عليك
تسجيل الدخول
او
تسجيل لمشاهدة الرابط المخفي
يجب عليك
تسجيل الدخول
او
تسجيل لمشاهدة الرابط المخفي
بعد ذلك تقوم باعادة تنصيب Anti Arp , أكرر انه يمكنم عدم حذفه ببرنامج Revo Uninstaller البرنامج
Anti Arp و هذا حتى يمكنكم الاحتفاظ بالخصائص التي قمتم بتغييرها في البرنامج.
تعريف البرنامج من موقعه الأصلي
ARP is the English abbreviation of Address Resolution Protocol. It is a link layer protocol working on the OSI Layer2 to provide a link between the layer and the hardware interfaces, and meanwhile serve the upper layer (Network Layer).
The Ethernet exchange equipments on the Layer2 can't identify the IP address which has 32 bits. They transmit the Ethernet data packets through 48-bit Ethernet address (we usually call it MAC address), which means that the transmission of IP data packets on the LAN relies on the MAC address, not the IP address, to identify the target. Thus, a corresponding relation must be set up between the IP address and the MAC address, and hence producing the ARP protocol.
In the Windows Operating System, the active ARP cache of localhost can be checked through typing command "arp -a" into the command window. What the ARP cache has saved is the corresponding relation between the IP address and the MAC address, as shown in the following illustration:
The Ethernet exchange equipments on the Layer2 can't identify the IP address which has 32 bits. They transmit the Ethernet data packets through 48-bit Ethernet address (we usually call it MAC address), which means that the transmission of IP data packets on the LAN relies on the MAC address, not the IP address, to identify the target. Thus, a corresponding relation must be set up between the IP address and the MAC address, and hence producing the ARP protocol.
In the Windows Operating System, the active ARP cache of localhost can be checked through typing command "arp -a" into the command window. What the ARP cache has saved is the corresponding relation between the IP address and the MAC address, as shown in the following illustration:
يجب عليك
تسجيل الدخول
او
تسجيل لمشاهدة الرابط المخفي
In the picture above, the "Internet Address" is IP address, and "Physical Address" is MAC address.
ARP packet can be divided into two types in accordance with different receivers:
1. Broadcast. Its destination's MAC address is FF-FF-FF-FF-FF-FF. The switch will transmit the broadcast packet to all the hosts on the LAN after receiving it.
2. Non-Broadcast. Only specified host can receive the non-broadcast packet.
ARP packet can be divided into two types in accordance with different receivers:
1. Broadcast. Its destination's MAC address is FF-FF-FF-FF-FF-FF. The switch will transmit the broadcast packet to all the hosts on the LAN after receiving it.
2. Non-Broadcast. Only specified host can receive the non-broadcast packet.
ARP packet can also be divided into two types according to functions:
1. ARP Request. It's used to access the corresponding MAC address of certain IP address on the LAN.
2. ARP Reply. It's used to inform other host of localhost's IP address and MAC address.
Usually all the Broadcast are ARP Request packets and all the Non-Broadcast are ARP Reply packets.
Suppose there are two host computers on a LAN, the host names, IP addresses and MAC addresses are as follows:
HostName IP MAC
A 192.168.0.1 AA-AA-AA-AA-AA-AA
B 192.168.0.2 BB-BB-BB-BB-BB-BB
When the host A needs to communicate with the host B, it will check its ARP cache first to see whether it has recorded the host B's MAC address or not. If the MAC address has been recorded, they can communicate directly; if not, the host A has to access the host B's MAC address through ARP protocol. Its specific way is the same as that the host A asks all the hosts on the LAN: "Hello, who is 192.168.0.2? This is 192.168.0.1. My MAC address is AA-AA-AA-AA-AA-AA. What is yours? Come, tell me." The packet sent by the host A belongs to: Broadcast-Request.
Once the host B receives "the ARP Broadcast:Request packet" from the host A, it will save or update the corresponding relation between the host A's IP address and MAC address to its ARP cache. Then "an ARP Non-Broadcast:Reply packet" is sent to the host A, implicating: "Hey, this is 192.168.0.2, my MAC address is BB-BB-BB -BB-BB-BB". When the host A receives the reply from the host B, it will save or update the corresponding relation between the host B's IP address and MAC address to its ARP cache. Then these two hosts can communicate with each other.
From the process of communication between the hosts on the LAN mentioned above, we can know that the host will save and update the local ARP cache table under following two conditions:
1. Having received "Broadcast:Request" packet
2. Having received "Non-Broadcast:reply" packet
1. ARP Request. It's used to access the corresponding MAC address of certain IP address on the LAN.
2. ARP Reply. It's used to inform other host of localhost's IP address and MAC address.
Usually all the Broadcast are ARP Request packets and all the Non-Broadcast are ARP Reply packets.
Suppose there are two host computers on a LAN, the host names, IP addresses and MAC addresses are as follows:
HostName IP MAC
A 192.168.0.1 AA-AA-AA-AA-AA-AA
B 192.168.0.2 BB-BB-BB-BB-BB-BB
When the host A needs to communicate with the host B, it will check its ARP cache first to see whether it has recorded the host B's MAC address or not. If the MAC address has been recorded, they can communicate directly; if not, the host A has to access the host B's MAC address through ARP protocol. Its specific way is the same as that the host A asks all the hosts on the LAN: "Hello, who is 192.168.0.2? This is 192.168.0.1. My MAC address is AA-AA-AA-AA-AA-AA. What is yours? Come, tell me." The packet sent by the host A belongs to: Broadcast-Request.
Once the host B receives "the ARP Broadcast:Request packet" from the host A, it will save or update the corresponding relation between the host A's IP address and MAC address to its ARP cache. Then "an ARP Non-Broadcast:Reply packet" is sent to the host A, implicating: "Hey, this is 192.168.0.2, my MAC address is BB-BB-BB -BB-BB-BB". When the host A receives the reply from the host B, it will save or update the corresponding relation between the host B's IP address and MAC address to its ARP cache. Then these two hosts can communicate with each other.
From the process of communication between the hosts on the LAN mentioned above, we can know that the host will save and update the local ARP cache table under following two conditions:
1. Having received "Broadcast:Request" packet
2. Having received "Non-Broadcast:reply" packet
ملحوظة :- البرنامج يقوم بأخفاء الأي بي من على الشبكة وبذلك لا يقوم احد بالتجسس على مكالمات الشات
للتحميل
رابط النسخة القديمة ودي جميلة جدآ
Version: v4.3.1
Size: 4.70 MB
Rls Date: 2007-08-16
Platform: win2000/XP/2003/Vista
Language: Simplified Chinese/English
Authorization: 15-day free trial
MD5 Checksum:
Version: v4.3.1
Size: 4.70 MB
Rls Date: 2007-08-16
Platform: win2000/XP/2003/Vista
Language: Simplified Chinese/English
Authorization: 15-day free trial
MD5 Checksum:
يجب عليك
تسجيل الدخول
او
تسجيل لمشاهدة الرابط المخفي
النسخة الحديثة ويتم تحميلهة من الموقع الرئيسي مباشر
Version: v6.0.1
Size: 4.70 MB
Rls Date: 15/10/2010
Platform: win2000/XP/2003/Vista/se7en
Language: Simplified Chinese/English
Authorization: 15-day free trial
MD5 Checksum:
Version: v6.0.1
Size: 4.70 MB
Rls Date: 15/10/2010
Platform: win2000/XP/2003/Vista/se7en
Language: Simplified Chinese/English
Authorization: 15-day free trial
MD5 Checksum:
يجب عليك
تسجيل الدخول
او
تسجيل لمشاهدة الرابط المخفي
يجب عليك
تسجيل الدخول
او
تسجيل لمشاهدة الرابط المخفي
:
